Energy saving 1ton coreless hydraulic steel shell induction melting furnace for metal melting

Energy saving 1ton coreless hydraulic steel shell induction melting furnace for metal melting

This high quality, latest model iron melting furnace is a power-saving product, with features such as fast temperature increase, low energy consumption and stable operation. The service life of the equipment is designed and manufactured not less than 30 years.

Features

The equipment technology is in the leading position within 10 years. Series inverter intermediate frequency power supply is adopted so that the electric furnace can output rated power regardless of whether it is cold, hot, or semi-charged or full-filled, and the power factor is constant at 0.98.

Detailde



This high quality, latest model iron melting furnace is a power-saving product, with features such as fast temperature increase, low energy consumption and stable operation. The service life of the equipment is designed and manufactured not less than 30 years. The equipment technology is in the leading position within 10 years. Series inverter intermediate frequency power supply is adopted so that the electric furnace can output rated power regardless of whether it is cold, hot, or semi-charged or full-filled, and the power factor is constant at 0.98.This melting furnace can greatly increase the melting efficiency of the foundry.
 
 
usage:
This
 1 ton  coreless hydraulic steel shell induction melting furnace is adopted by electromagnetic induction principle which can be used to melt or heat iron, cast iron and other metal scrap . 
 
 
The advantages of this device:
Our series inverter SCR intermediate frequency power supply has the following advantages.
1.The operation is very simple, to avoid accidents caused by mistakes.
2.Multiple security protection measures, early detection of problems, and avoiding further expansion of the failure.
3.High power factor, low harmonic interference. The power factor of the whole machine is ≥0.98, no extra equipment is needed, so the investment cost is reduced.
4.To adapt to a variety of load frequencies.
5.High start-up success rate, any load state can be 100% start, with a very high load adaptability: Even in the frozen furnace (cold stove) state can still be high-power factor full-load output.
6.A very high energy-saving effect: relative parallel resonant power saving rate can reach 30%.
7.Environmental protection and energy saving, the sound of the whole machine is stable and light, no clutter noise, and minimal harmonics in the power network.
 
Mainly parameters

Furnace Model Rated Capacity Rated Power MF Frequency Power Input Voltage MF Output Voltage Pulse Melting Time Electricity Consumption Transformer Capacity Required
T KW KHZ V V   Minutes/T KWH/T KVA
GW-0.1T-100KW 0.1 100 1 380 750 6 40 680 120
GW-0.15T-160KW 0.15 160 1 380 750 6 50 680 250
GW-0.25T-160KW 0.25 160 1 380 750 6 55 650 250
GW-0.25T-250KW 0.25 250 1 380 750 6 60 640 315
GW-0.35T-300KW 0.35 300 1 380 750 6 60 640 400
GW-0.5T-400KW 0.5 400 1 380 750 6 65 640 500
GW-0.75T-500KW 0.75 500 1 380 750 6 65 640 600
GW-1T-700KW 1 700 1 380 750 6 70 620 900
GW-1.5T-800KW 1.5 800 1 660 1200 6 70 600 1000
GW-2T-1200KW 2 1200 0.5 660 1200 6 70 580 1250
GW-3T-1800KW 3 1800 0.5 660 1200 12 65 550 1800
GW-5T-3000KW 5 3000 0.5 660 1200 12 60 520 3600
GW-10T-5000KW 10 5000 0.5 660 1200 12 70 500 6500
 

intersting Products:*
Name:*
Company:
Email:*
Tel/Mobile:
Tell us your needs (as specific as possible)