1 ton 1000 kw induction furnace for metal melting cheap price

1 ton 1000 kw induction furnace for metal melting cheap price

The equipment consists of a intermediate frequency power supply a coreless steel shell induction melting furnace water cooling tower and auxiliary equipment required for the normal operation of the system.

Features

Energy saving Environmental protection Low pollution. Much more efficient than gas-fired and coal-fired method.

Detailde


Product Description

1 ton 1000 kw induction furnace in which the heat is applied by induction heating of metal, according to the principle of electromagnetic induction. Which has the advantages of low energy consumption, high efficiency, very safe and easy to operate etc.Induction furnace are used to melting iron and scrap bronze, copper, aluminum, and other metals. 

 

The advantages of this device:

Our series inverter SCR intermediate frequency power supply has the following advantages.

1.The operation is very simple, to avoid accidents caused by mistakes.

2.Multiple security protection measures, early detection of problems, and avoiding further expansion of the failure.

3.High power factor, low harmonic interference. The power factor of the whole machine is ≥0.98, no extra equipment is needed, so the investment cost is reduced.

4.To adapt to a variety of load frequencies.

5.High start-up success rate, any load state can be 100% start, with a very high load adaptability: Even in the frozen furnace (cold stove) state can still be high-power factor full-load output.

6.A very high energy-saving effect: relative parallel resonant power saving rate can reach 30%.

7.Environmental protection and energy saving, the sound of the whole machine is stable and light, no clutter noise, and minimal harmonics in the power network.

 

Equipment components:

The equipment consists of a intermediate frequency power supply, a coreless steel shell induction melting furnace, water cooling tower and auxiliary equipment required for the normal operation of the system.

 

 

Product advantages:

1). Energy saving, Environmental protection, Low pollution.

2). Much more efficient than gas-fired and coal-fired method.

3). 100% start-up success rate; power factor > 95%.

4). Perfect and complete protection functions, increasing machine's reliability & stability.

5). No special foundations required, Low operating cost, Easy operation, high stability.

6). Modular design, ease of maintaining and repairing.

1 ton 1000 kw induction furnace for metal melting cheap price

Mainly parameters
Some parameters can adjustable according to your needs!
Furnace Model Rated Capacity Rated Power MF Frequency Power Input Voltage MF Output Voltage Pulse Melting Time Electricity Consumption Transformer Capacity Required
T KW KHZ V V   Minutes/T KWH/T KVA
GW-0.1T-100KW 0.1 100 1 380 750 6 40 680 120
GW-0.15T-160KW 0.15 160 1 380 750 6 50 680 250
GW-0.25T-160KW 0.25 160 1 380 750 6 55 650 250
GW-0.25T-250KW 0.25 250 1 380 750 6 60 640 315
GW-0.35T-300KW 0.35 300 1 380 750 6 60 640 400
GW-0.5T-400KW 0.5 400 1 380 750 6 65 640 500
GW-0.75T-500KW 0.75 500 1 380 750 6 65 640 600
GW-1T-700KW 1 700 1 380 750 6 70 620 900
GW-1.5T-800KW 1.5 800 1 660 1200 6 70 600 1000
GW-2T-1200KW 2 1200 0.5 660 1200 6 70 580 1250
GW-3T-1800KW 3 1800 0.5 660 1200 12 65 550 1800
GW-5T-3000KW 5 3000 0.5 660 1200 12 60 520 3600
GW-10T-5000KW 10 5000 0.5 660 1200 12 70 500 6500
Related products

 1 ton 1000 kw induction furnace for metal melting cheap price


intersting Products:*
Name:*
Company:
Email:*
Tel/Mobile:
Tell us your needs (as specific as possible)